Home / Blog Center / Chargers / The Best Practices for Shower Switch Heights: A Homeowner's Guide

The Best Practices for Shower Switch Heights: A Homeowner's Guide

31/12/2024 | Hawkrown

The shower switch is an essential bathroom fixture found in every household, with a high usage frequency. Proper installation is crucial, especially since its height is closely related to our comfort while using it. So, what is the suitable height for a shower switch? Let's learn more about it.

1. Shower Switch Height Standard Dimensions

Before installing the shower faucet, it is important to determine the location of the shower switch. The distance from the shower switch to the floor should ideally be controlled within the range of 90-100 cm. Within this height range, adjustments can be made based on the height of family members. However, it's best not to install it lower than 110 cm, as this could lead to issues with the water flow from the shower faucet into the pipes.

Once the shower faucet has been determined, the exposed thread should typically be buried within the wall tiles. It is recommended to use tile covers for this purpose, as it would enhance the appearance of the shower faucet later on. During the installation of the water pipes, the reserved position should be carefully planned, typically 15 mm above the rough wall, so that it can be neatly concealed after the tiles are affixed.

If installing a wall-mounted shower faucet, the distance between the hot and cold water pipes should be around 15 cm. It is advisable to measure accurately before installation and soak the pipes in water to prevent damage to the faucet due to hard water.

2. Installation Considerations for the Shower Head

When installing the shower head, it is essential to mark the position before drilling holes, and care should be taken to avoid piercing any water pipes inside the wall.

When installing the round cover on the shower head, it's crucial to tighten the screws properly; otherwise, prolonged use may result in the shower head coming loose.

When installing a handheld shower head, make sure it is straight and not twisted.

Conclusion:The installation of the shower switch is very important, and it is advisable to follow the standard installation guidelines. If you are not very confident in the installation process, it is recommended to hire a professional installation company for a safer and more reliable solution. For more related knowledge, please continue to follow our information platform, where we will provide more exciting content in the future.

Contact Us

Submission Successful

ok