Home / Blog Center / Chargers / How to Create a Textured Shower Floor: Techniques and Tips
How to Create a Textured Shower Floor: Techniques and Tips
31/12/2024 | Hawkrown
People typically design the shower area in bathrooms to ensure better drainage by creating a floor with a slope. Today, I'd like to share the methods for creating a sloped floor in a shower room. If you're interested, let's take a look together!
How to Create a Textured Shower Floor: Techniques and Tips
1. Some construction workers sometimes find it cumbersome and only cut a square hole in the floor tiles for the drain when installing it. However, since the tiles are flat, unless the drain is located at the intersecting points of four tiles, it can be difficult for the water to drain properly, leading to localized water accumulation.
2. One effective design is to create a cross shape for the shower drain, where the center is lower than the surrounding area. This design allows for better drainage due to the slight depression. It's advisable to position the drain in the corner of the shower area, as the gradient is easier to manage and facilitates water drainage.
3. If the existing drain pipe is not close to the wall, it is important to relocate the drain pipe during the plumbing renovation so that it is aligned with the wall.
4. When constructing the shower area, it’s essential to consider adding a partition. This helps to prevent water from flowing in the wrong direction and minimizes splashing, and using waterproof strips can be very effective.
5. The area around the drain must be sloped towards it. This slope should be established from the center of the drain outwards. Use a screed to ensure the surface is flat, without any pits or gaps, and most importantly, it should not retain water.
6. You can create drainage paths by cutting narrow grooves in the tiles, but be careful not to cut too deeply. The goal is to allow water to flow through the gaps, which helps prevent standing water in the bathroom.
In summary：that’s the information on how to create a sloped surface for the floor in a shower room. I hope this helps your understanding. For more related information, please continue to follow our website, and I'll be glad to provide answers to your questions.
