Home / Blog Center / Chargers / Mastering the Art of Removing Toilet Seat Buffers

Mastering the Art of Removing Toilet Seat Buffers

30/12/2024 | Hawkrown

The toilet is one of the commonly used sanitary fixtures in daily life, providing convenience for people. So, how to disassemble the toilet seat buffer? What should you pay attention to when using the toilet daily? Let’s take a look!

一、How to Disassemble the Toilet Seat Buffer

1、First, prepare a hex wrench to facilitate unscrewing the screws.

2、Then, press down on the connection between the toilet seat and the outer side, and lift the toilet seat.

3、Finally, insert the short end of the hex wrench into the pin, push it firmly to remove the pin from the other side, and you will be able to take off the buffer.

If the toilet buffer is not functioning properly, it is often due to loose screws. It is recommended to first loosen the screws on the back of the toilet, adjust the toilet's position, and if that does not work, remove the nuts and cover from the toilet seat, clean off any dirt and burrs, and reinstall it properly. If the problem persists, it may be necessary to replace the buffer.

二、What to Pay Attention to When Using the Toilet

1、Avoid Placing a Wastebasket Near the Toilet

Many people tend to place a wastebasket next to the toilet, but it is not advisable. If the wastebasket is not emptied daily, it can breed bacteria in just a day or two. Throwing waste into the toilet can also lead to clogs. Thus, it is recommended to dispose of waste promptly or use a covered wastebasket.

2、Keep the Toilet Brush Clean and Dry

Since the toilet is used frequently, it should be cleaned regularly. If there are still marks after flushing, it is advisable to scrub with a toilet brush; do not wait until it turns yellow. Additionally, the toilet brush should be cleaned and hung up, sprayed with disinfectant, and not placed in an airtight area to avoid bacteria growth.

3、Close the Toilet Lid Before Flushing

It is best to close the toilet lid before flushing. Don’t underestimate this action; when you flush, bacteria and microorganisms can be propelled up to 6 feet high, floating in the air for hours before settling on bathroom fixtures, leading to pollution and affecting human health.

Summary:The above content introduces how to disassemble the toilet seat buffer and what to pay attention to when using the toilet daily. I hope this information helps those in need. If you wish to learn more related knowledge in the future, feel free to follow Hawkrown Network for updates.

Contact Us

Submission Successful

ok