Dealing with a Distant Shower and Drain: Tips and Tricks

As we all know, the shower and the floor drain are essential components in home installation. So, what should you do if the shower is too far from the floor drain? Where is the appropriate location to install the shower room and the floor drain? Let me briefly introduce this.

What to do if the shower and the floor drain are too far apart

First, you need to remove the tiles around the floor drain and dig out the cement until you reach the drainage pipe. Next, you can connect a new pipe and install it to your desired location. Alternatively, you can open a groove in the floor and connect the drainage pipe to the original floor drain position, but the downside is that it is very prone to blockage, especially at the drainage point of the shower room.

Appropriate location for floor drain installation in the shower room

The floor drain is usually installed in the corner, which not only aids in the drainage of sewage but also ensures the aesthetic appearance of the living space. It should also be installed at the edge of the tiles, rather than cutting through the middle of the tiles, as this would prevent the floor drain from being the lowest point, causing water to remain. During the installation process, be careful to ensure that the drainage reserve hole aligns perfectly with the floor drain, and the inlet of a multi-channel floor drain should not be too many.

Currently, most developers reserve the drainage outlets and typically install them opposite or below the showerhead.

How to install a floor drain in the shower room

1. Preparation work

Before installing the floor drain, you should prepare the floor drain and check it for any damage or issues, as well as whether all the accessories are complete. Next, check the drainage pipe opening for any dirt; if there is any, clean it up and wrap the drainage pipe to prevent any foreign objects from falling into the drainage pipe before installing the floor drain. Additionally, it's important to note that the installation of the floor drain should be lower than the ground level.

2. Precautions

During the installation, you should pre-locate the floor drain and ensure that the surrounding tiles are higher than the floor drain so that water can drain away effectively. Also, check the installed pipes; if any modifications are needed, do so before installing the floor drain, and only then proceed with the repair work.

In conclusion：after reading the above introduction, I believe you now have a better understanding of what to do if the shower and the floor drain are too far apart. For more related information, please continue to follow our website, as we will present more exciting content in the future.