Adjusting Water Temperature with Ease: Thermostatic Shower Tips

The thermostatic shower head is a type of shower that allows for the regulation of water temperature，providing users with a comfortable and safe showering experience。However，some people might not know how to adjust the water temperature on a thermostatic shower head。Let's learn how to do it。

How to Adjust the Water Temperature on a Thermostatic Shower Head

1、Typically，there are buttons on either side of the shower faucet。The button on the right side is generally used to control the water flow mode and quantity。When the scale on the right button is aligned，it indicates that the thermostatic shower head is in the off position。

2、To increase the water flow from the shower head below，grasp the right button and turn it forward。The more you turn it forward，the greater the water flow。To reduce the water flow，grip the right button and turn it backward。

3、The left button is used to control the temperature of the water。If you want to lower the water temperature，you should grip the left button and turn it forward。To raise the temperature，you need to hold the left button and turn it backward。

4、Generally，when the left button is turned to 40 degrees，it will stop turning，as water temperatures above 40 degrees can cause burns to the skin。Therefore，thermostatic shower heads usually limit the maximum water temperature to below 40 degrees。

5、If the user wants to set the water temperature above 40 degrees，they must hold down the red safety button on the left button while simultaneously turning the left button further back until they reach the desired temperature。

This is a detailed introduction on how to adjust the water temperature on a thermostatic shower head。I hope it helps those who need it to overcome the issue of adjusting the temperature。If you plan to use a thermostatic shower head，it's essential to understand the correct operating procedures and precautions to avoid any problems。