What is the Ideal Distance from Toilet Center to Side Walls?

When installing a toilet in a bathroom, it is important to reserve the proper installation position. Here’s a brief introduction to the specifications for toilet installation.

一、How far should the center of the toilet be from the walls on the sides

The center of the toilet should be at least 38 centimeters away from the walls on either side. There should be at least 75 centimeters of space between the walls beside the toilet. When installing the toilet, sufficient space should be left around it. There should be 20-30 centimeters of space between the outer side of the toilet tank and the wall. The distance from the back wall to the center of the toilet is not simply 30 centimeters; instead, you should reserve 32 centimeters, which accounts for the 2 centimeters of wall tile thickness.

二、What are the precautions for installing a toilet

1、When installing, it is essential to consider the position of the toilet. The toilet can be installed close to the wall, but there needs to be adequate distance maintained because we might install items like a tissue holder or grab bar on the wall nearby for convenience. Additionally, the toilet should not be too close to the shower area. If there is no separation between wet and dry zones in the bathroom, water from showering can easily splash onto the toilet. If the installation position is not ideal, a toilet offset connector can be used to adjust its position.

2、During the installation of the toilet, it is necessary to check the water supply and drainage pipes. For example, you should turn on the toilet water valve to check if water comes out of the supply pipe normally and ensure the pipes are free of dust. You should also check if the drainage pipe is clogged with mud or debris by pouring water into the drainage opening to see if it flows freely.

3、Installing a toilet is not very complicated. You just need to follow the requirements for proper installation. Before installation, check if the floor is level and clean. The toilet sealing ring should be firmly fixed to the drainage opening, and the drainage opening needs to align with the sewer pipe to avoid leakage issues. It’s best to wait 24 hours after installation before using the toilet, as the silicone seal around the base of the toilet will not have fully cured yet, and immediate use could cause it to shift.

In summary：this is a simple introduction to the center distance of the toilet from the walls on either side. I hope this article helps you understand the topic. For more related information, please continue to follow our website.