Easy Steps to Change the Toilet Seat Damper

When it comes to toilets, everyone is quite familiar. However, when lifting or lowering the toilet seat, there is no sharp sound, thanks to the toilet lid dampers. So, how do you replace the toilet lid dampers? What details should you pay attention to when using a toilet? Let’s take a look！

一、How to Replace Toilet Lid Dampers

1、First, press down on the pins connecting the toilet seat to the outer part.

2、Then, lift the toilet seat to remove the toilet lid.

3、Finally, use a right-angle hex wrench to insert it into the pins and apply force; the pins will come out. Remove the other side pin as well, then install the new dampers on the toilet lid in the reverse order. Make sure the two holes on the pins align with the two posts on the toilet.

A friendly reminder: If the toilet lid damper is not functioning properly, it is usually due to loose screws. Tighten the screws and adjust them accordingly. If it still does not work, try removing the nut and lid to clean off any dirt and burrs, then reinstall the toilet lid. If the issue persists, you will need to replace the dampers.

二、Details to Pay Attention to When Using a Toilet

1、Close the Toilet Lid When Flushing

First, always make sure to close the toilet lid before flushing. This is because the sudden water vortex can spray bacteria into the air, which can remain suspended for hours and settle on toothbrushes, cups, and other sanitary items, leading to contamination.

2、High Bacteria Levels on the Toilet Seat

Secondly, studies have shown that toilet seats are prone to harboring many bacteria, especially in winter when cloth pads are placed on the seat. These can easily absorb excrement contaminants and spread diseases, so it is best to disinfect the seat daily.

3、Clean Dirty Items Inside the Toilet Regularly

Lastly, the inner walls of the toilet can easily accumulate urine stains and feces. Even after flushing, residues may remain. It is advisable to use a toilet brush to remove these stains to avoid yellow rings and the growth of mold. In addition to the inner walls, the toilet bowl's outlet and the outer base are also prone to dirt; regular cleaning is recommended.

In summary：the above content introduces how to replace the toilet lid dampers and the details to be mindful of when using a toilet. I hope this information helps those in need. If you want to learn more related knowledge in the future, feel free to follow Hawkrown news updates.