How to Identify and Repair a Toilet That Leaks After Flushing

Toilets are frequently used in daily life, and when issues arise, they not only affect usability but may also lead to waste, so prompt handling is necessary. For example, if your toilet is leaking water after you flush, let's take a look at the possible causes.

Causes of Toilet Water Leakage After Flushing and How to Fix Them：

1、Possible Loose Connection of the Flush Valve

If you're using a non-integrated flush valve, prolonged use may cause the connections to develop gaps due to water pressure, leading to leaks. You need to open the connection part, replace the sealing ring inside, and then reconnect it. To be more secure, you can wrap the outer part with sealing tape after reconnecting.

2、Possible Switch Malfunction, Not Resetting

Every flush requires pressing the flush button on the tank, so the internal plastic switch can wear out over time. If the switch fails to reset, you’ll need to replace the internal switch.

3、Possible Loose Connection of the Float Ball

Under normal circumstances, the float ball is connected to the fill valve, allowing for the completion of flushing and controlling the water intake once the flush button is pressed. If the connection between the float ball and the fill valve is loose, it could cause water leakage. You will need to reconnect the float ball to the valve. If the float ball is faulty, simply replace it with a new one.

4、Possible Flush Valve Failure

When the flush valve fails, it can cause water leaks. You should check whether the flush valve is malfunctioning; if it is, you’ll need to replace it. If the flush valve is functioning normally, check the rubber seal at the outlet of the tank. If you find any debris blocking it, make sure to clean it promptly.

In summary：the above discusses the potential causes of water leakage after flushing the toilet. I hope this information is helpful to you. Toilets can develop faults over time, and the solutions vary depending on the cause. Therefore, it’s essential to identify the problem before implementing a fix. If you would like to learn more relevant news, feel free to follow Hawkrown Network.