Recommended Clearance Dimensions for Toilet Placement

Before installing a toilet, it is essential to reserve the appropriate installation position. What are the dimensions for reserving the toilet position?

一、What are the dimensions for reserving the toilet position

When reserving the toilet position, three aspects need to be considered: the toilet's rough-in, the left and right spacing from the toilet, and the front spacing from the toilet.

1、The toilet rough-in distance generally requires a reserved space of 300-400 millimeters. This distance is based on the toilet rough-in measurement. Common rough-in sizes are 300mm, 350mm, and 400mm, which refer to the distance from the center of the toilet's drainage pipe to the wall. If the bathroom has not yet been tiled, it is important to factor in the thickness of the tile when reserving the rough-in distance, which is usually about 20mm. Typically, developers will pre-install the toilet drainage pipe, and after measuring the rough-in distance in your home, you can select a suitable toilet size.

2、The left and right spacing from the toilet should generally be between 75-90 centimeters. A standard toilet width is typically 30-50cm, so it is necessary to reserve at least 20 centimeters of space on each side of the toilet; ideally, 24-28 centimeters would be preferable. If the reserved distance is too small, it can lead to sanitation dead corners and a cramped feeling when using the toilet.

3、A minimum space of 45cm should be reserved in front of the toilet. If the bathroom space allows, it is recommended to reserve 60-80cm of distance in front. Reserving adequate space in front of the toilet not only facilitates movement but also provides comfort for leg space when using the toilet.

二、What should be noted during toilet installation

In some households that do not have a wet and dry separation in the bathroom, it is important to ensure that the toilet is not too close to the shower area, as this can lead to the toilet getting wet during showers, making it inconvenient to use. Before installing the toilet, it is crucial to reserve the installation position to avoid any issues with usability after installation. Additionally, check that the drainage pipes are not blocked by mud or other debris before installation.

In summary：This brief introduction provides insights into the dimensions for reserving a toilet position. We hope that after reading this, you will have a better understanding of the toilet position reservation dimensions. To learn more about related topics, feel free to continue following our updates on related platforms.