Home / Blog Center / Chargers / Shower Mixing Valve Installation Dimensions: A Comprehensive Guide
Shower Mixing Valve Installation Dimensions: A Comprehensive Guide
25/12/2024 | Hawkrown
To conveniently access hot water, many families install shower mixing valves in their bathrooms. When installing a shower mixing valve, it is important to place it at a certain height. So, what are the installation dimensions for a shower mixing valve? Let’s take a look together.
Shower Mixing Valve Installation Dimensions: A Comprehensive Guide
1. The typical installation height for a shower mixing valve is generally around 1.1 meters or 1.15 meters from the ground. This height makes it more convenient during bathing.
2. When connecting the water pipes for the shower mixing valve, the hot water pipe should be connected on the left, and the cold water pipe should be connected on the right. The distance between the two pipes should be kept between 1 meter and 2 meters. If the homeowner installs a non-adjustable showerhead, the overall installation height may be higher.
What to pay attention to when installing a mixing valve
1. Before installing the mixing valve, the debris in the pipes should be thoroughly cleaned to avoid blockages in the mixing valve.
2. It is essential to keep the pressure of the hot and cold water as balanced as possible before installation. If there is too much difference in pressure between the hot and cold water, a pressure-reducing valve should be installed on the high-pressure side or a booster valve on the low-pressure side.
3. When installing the mixing valve, be sure to check the labels on the mixing valve. Generally, the red mark indicates the connection for the hot water pipe, while the blue mark indicates the connection for the cold water pipe.
4. If the homeowner chooses to install a solar water mixing valve, it is crucial to check whether the nominal pressure and the temperature range of the mixing valve are compatible with the product parameters of the solar water mixing valve. If they do not match, installation should not proceed.
In summary：The above is a detailed introduction to the installation dimensions for shower mixing valves and considerations to keep in mind during installation. The shower mixing valve should be installed at a height of about 1.1 meters or 1.15 meters from the ground for better convenience.
