Mastering Your Toilet Seat: What Do the Two Buttons Do?

The toilet is a common fixture in bathrooms, and the toilet lid has two buttons. Let's take a look at the functions of these two buttons.

一、Functions of the Two Buttons on the Toilet Lid

The two buttons on the toilet lid are referred to as the full flush button (the larger button) and the half flush button (the smaller button). The full flush button releases a larger water volume, fully draining the water tank. This has a strong flushing pressure and is effective for cleaning, making it suitable for larger flush needs. The half flush button releases a smaller volume of water, draining only half or two-thirds of the water tank, which is more suitable for minor flushing needs. When using the toilet, you can choose the appropriate button based on your needs, helping to conserve water. In cases of minor clogs, it is recommended to press both buttons simultaneously, as this will increase flushing pressure and effectiveness to help clear the toilet.

二、How to Increase Toilet Flushing Pressure

After using the toilet for some time, you may experience a decrease in flushing power. You can address this issue based on specific situations:

1、Adjust the Water Level Adjuster Arm

oilets primarily rely on the length of the adjuster arm to control flushing. If the adjuster arm is too low, it may cause insufficient water pressure. Simply open the toilet tank and adjust the position of the arm on the corresponding screw.

2、Adjust the Inlet Valve

If the water level in the tank is too low, it can result in reduced flushing volume. You can adjust the water level by changing the height of the float. Alternatively, use a screwdriver to adjust the float's fixing screw.

3、Replace Spring Components

If the flush button does not rebound or is stuck when pressed, it is likely that the internal components of the button have aged. Simply buy a new spring component and install it.

4、Adjust the Water Volume Controller

If the water volume is low, it may be because the water volume controller is not set to the maximum. You can adjust the switch to the appropriate position; generally, the maximum water volume setting is at the bottom of the controller.

Conclusion：This article has introduced the functions of the two buttons on the toilet lid. We hope this information is helpful. For more related knowledge, please continue to follow the Hawkrown consultation platform.