What is the Ideal Height for Smart Toilet Sockets?

Many families choose intelligent toilets, so it is necessary to set up sockets on the wall in advance. What is the recommended height for the intelligent toilet socket? Let’s take a look at the relevant information.

一、What is the recommended height for the intelligent toilet socket

The intelligent toilet socket should be positioned 30 to 50 centimeters above the floor. When setting it up, consider the structure of the toilet. Generally, within this range, it will meet the requirements for use. However, it is important not to place the water supply interface on the same side as the power socket. The socket should be placed 20 centimeters to either the left or right side of the toilet's drainage pipe center. Keeping the distance between water and electricity as far apart as possible can enhance safety.

二、Considerations for the position of the intelligent toilet power socket

1、Reserve a power socket

During renovation, if you plan to install an intelligent toilet in the future, you should design the electrical circuit in advance and reserve a socket near the installation area. Otherwise, it will be difficult to make modifications later.

2、Separate wet and dry areas in the bathroom

Since intelligent toilets require electricity, ensure to create a wet and dry separation when installing them. Also, protect the power socket of the intelligent toilet to prevent water splashes from reaching the electrical components.

3、Professional installation

When purchasing an intelligent toilet, choose a vendor that offers installation services. It is not advisable to install it yourself, as improper installation may lead to problems during later use. If the intelligent toilet malfunctions, do not attempt to dismantle it yourself; notify a professional for repairs.

4、Disconnect power if not in use for a long time

If the intelligent toilet will not be used for a long period, it is advisable to turn off the power. Failure to do so may lead to problems if the toilet gets damp, causing the circuit board to malfunction, potentially resulting in fire hazards. Keeping it powered on for an extended time may also increase the risk of electric leakage. Therefore, caution is recommended when making a choice.

In conclusion：this is an introduction to the recommended height for intelligent toilet sockets. We hope it is helpful. For more related information, please continue to follow the Hawkrown Network consulting platform, where we will present more exciting content in the future.