The Functions of the Two Buttons on Your Toilet: A Complete Guide

The toilet is a frequently used fixture in the bathroom. When using it, you may notice two buttons on the tank. Let's take a look at the functions of these two buttons.

一、Functions of the Two Buttons on the Toilet

The larger button is called the full flush button, which releases a large amount of water with high flushing pressure. Pressing it once will completely empty the tank and is suitable for a full flush. However, it uses more water. The smaller button is the half flush button, which dispenses a smaller amount of water, releasing only half or two-thirds of the tank's contents. This button is appropriate for a partial flush. When using the toilet, you can select the appropriate button based on your needs to conserve water. If the toilet is experiencing a slight blockage, it is recommended to press both buttons simultaneously to release all the water in the tank, increasing pressure and enhancing the flushing effect for better clearing.

二、Daily Maintenance of the Toilet

1、Do not place the toilet under direct sunlight or keep it close to heat sources, as this may cause discoloration. When cleaning the toilet, avoid pouring in boiling water; high temperatures can crack the toilet. It is advisable to use warm water between 1-45°C for cleaning the toilet.

2、Do not dispose of non-dissolvable items into the toilet to prevent clogging. The toilet seat should be regularly cleaned with a soft cloth, and avoid using strong acidic cleaners to prevent corrosion of the toilet pipes. Additionally, refrain from using sharp objects to scrape the toilet, as this can damage the glaze and affect its overall appearance.

3、Do not use chlorine-based cleaners inside the tank, as this can damage internal components and cause leaks. Regularly clean the filter to avoid clogs that may slow down the water inflow. If the local water quality is hard, pay attention to the impurities in the water that may block the toilet's outlet holes, and conduct timely cleaning.

4、Periodically use a long brush with neutral cleaner to scrub the surface of the toilet and the flushing holes thoroughly. Also, note that the toilet lid is a very important component; if the tight seal ring is loose, make sure to tighten it promptly.

In summary：this article provides insights into the functions of the two buttons on the toilet and tips for daily maintenance. I hope this information is helpful to everyone.