How to Disassemble and Install a Three-Stage Showerhead

If you're considering a shower，you'll definitely need to install a showerhead。The three-function pressurized showerheads are quite popular，as they come with three adjustable settings for convenience。However，some friends may not know how to install or disassemble them，and feeling completely lost is common。Below，I'll provide a simple introduction that I hope will be helpful。

一、Installing and Disassembling a Three-Function Pressurized Showerhead

Installation Steps:

1、First，securely attach the two connectors together; you can wrap a tape around them a few times。After wrapping，give it a gentle tug to check for any looseness。

2、Place the cover on top and insert a rubber gasket，then you can secure it to the wall。Make sure to drill holes beforehand。

3、Use screws to fix it in place，and then attach all other parts so it’s ready for normal use。

If you want to disassemble it，simply follow the reverse order: remove all parts first，and then unscrew the screws。

二、Considerations When Buying a Three-Function Pressurized Showerhead

1、There are many brands to choose from。When selecting a brand，take your budget into account。If your budget allows，it’s generally recommended to choose a well-known brand，as the product quality is more likely to be guaranteed，providing peace of mind during use。

2、When installing，be sure to choose an appropriate position。Since the pressure is quite high and the water flow is substantial，it’s preferable to place it at a higher position so that the water hits your body more comfortably and doesn’t feel painful。

3、If the water pressure is unstable，definitely avoid using it，as this may damage the water heater。This is an important point to keep in mind。

In summary，the above information covers the installation and disassembly of a three-function pressurized showerhead。I hope it can assist everyone。If you need to install or disassemble，you can follow the steps I outlined。For more information，please continue to follow Hawkrown.com。