Why Does a Toilet Have Two Buttons？

The toilet is a product that is used frequently, and to achieve a better effect, it is essential to understand its functions before use. Below, I will explain why toilets have two buttons.

一、Why do toilets have two buttons

The reason for having two buttons is primarily designed for water conservation. Generally, the larger button is for a full flush, which empties the entire water tank when pressed, while the smaller button is designed for a half flush, which only releases half the water. This allows users to choose according to their needs. It is best not to press both buttons simultaneously, as it could lead to excessive water wastage.

二、How to maintain a toilet daily

1、Toilets should not be placed under direct sunlight or near heat sources to prevent discoloration. When cleaning the toilet, avoid pouring excessively hot water into it, as high temperatures can cause cracks. It is recommended to use warm water at around 1-45℃.

2、Do not dispose of non-dissolvable items in the toilet to prevent clogging. The toilet seat should also be cleaned regularly with a cloth. When cleaning, do not use strong acid cleaners to avoid corroding the toilet pipes, and do not use sharp objects to prevent damaging the glaze and affecting overall aesthetics.

3、Avoid using chlorine-based cleaners in the water tank to prevent damage to internal components, which may cause leaks. Regularly clean the filter to prevent clogging and ensure proper water inflow. When the water is hard, check for any impurities in the water that may clog the outlet holes and keep them clean.

4、Regularly use a long-bristled brush with a neutral detergent to clean the surface and flush holes thoroughly. Pay attention to the toilet lid, which is an important component; if the gasket becomes loose, it should be tightened promptly.

In summary：the reason toilets have two buttons is primarily for water conservation. I hope the above information is helpful to everyone.