Home / Blog Center / Chargers / How to Fix a Toilet that Drains Slowly: A Comprehensive Guide
20/12/2024 | Hawkrown
If a toilet is clogged, it can lead to inefficient flushing. However, sometimes a toilet may not be clogged but still have slow drainage and lack of flushing power. Here’s an explanation of why this might occur and what to do about it.
一、Reasons for Slow Drainage and Lack of Flushing Power in an Unclogged Toilet
1、Low Water Pressure:
One possible reason is low water pressure in the home. If the water pressure is low, the water tank of the toilet may not fill sufficiently. When the flush button is pressed, there will not be enough force for the flush, leading to slow drainage and ineffective cleaning. In this case, the water level in the toilet tank needs to be increased, or the water level of the inlet valve should be adjusted upward.
2、Poor Toilet Design:
Another possibility is that the toilet itself is poorly designed, resulting in ineffective flushing. In this situation, it is advisable to replace the toilet with a high-quality one that has better flushing capabilities.
3、Damaged Seal Flange:
It could also be due to damage to the seal flange at the bottom of the toilet. This damage may allow air to enter during flushing, reducing the flushing power, and causing slow drainage even when the toilet is not clogged. In this case, the damaged flange should be replaced, and adhesive should be used to ensure a tight seal.
二、What to Do If the Toilet Lacks Flushing Power
1、Adjust Flush Button Lever:
If the lever connected to the flush button is too short, it may lead to the toilet flushing for only a short time before stopping, causing a lack of flushing power. To fix this, loosen the nut on the flush button lever and adjust its length to an appropriate size before tightening the nut again.
2、Low Water Level in Tank:
If the water level in the toilet tank is low, this can also reduce the flushing volume and power. To resolve this, locate the inlet valve inside the tank and rotate its adjustment arm to the right to raise the height of the float ball. Once the float ball is elevated, the water level in the tank will also increase. Additionally, you can place a filled water bottle inside the toilet tank to increase the water level using the weight of the bottle.
concludes:
the detailed introduction regarding the causes of slow drainage and lack of flushing power in an unclogged toilet, as well as solutions to these issues. We hope this information is helpful to those in need. For more related knowledge, feel free to continue following our information platform, where we will provide more interesting content in the future.