DIY Installation of a 90-Degree Shower: Everything You Need to Know

Many bathroom layouts have shower areas at right angles, so how do you install a 90-degree corner shower? Let's take a look together.

How to Install a 90-Degree Corner Shower

First, install the shower base. During this step, ensure that the base is dry, then drill a hole to secure the aluminum material to the wall. After drilling, insert rubber plugs into the holes and fasten the aluminum strip to the wall. Next, install the glass material into the opening of the base. You will need to drill a hole in the glass and install the fastening device, and finally connect the valve and the overhead pipe.

What to Pay Attention to When Installing a Shower Room

1. The decoration of the shower room cannot be installed according to requirements; it must be designed before renovating the bathroom. Pre-plan the wiring and install protective switch devices to prevent potential contacts. There is a risk of leakage, which can endanger safety in future use. When selecting the size of the shower room, it's essential to choose products that fit according to the size of the bathroom. If the shower is too low or too high, it may feel uncomfortable. Typically, the height of the showerhead should be about 2.1 meters, and an additional 10 cm should be added after installation. At this time, consider the height of your bathroom.

2. The rough walls of real estate company houses are not waterproof; before laying tiles, it is necessary to scrape and apply a layer of impermeable cement. After tiling is completed, it is essential to have a decorator work on treatment at the joints of tiles and walls.

3. If the wheels of a sliding shower room are loose or fall off, seek maintenance personnel for timely adjustments so that the wheels can effectively support the movable door. Clean debris with a paper towel soaked in vegetable oil. Ensure that the track does not have a strong impact on the movable door for smooth sliding. Make sure that the movable door does not fall off.

In summary:Above is what I shared about how to install a 90-degree corner shower and what to pay attention to during the installation. I believe after reading the above, you have gained some insights. For more related information, please continue to follow our website, and I will answer your questions one by one.