Expert Tips for Installing Your Showerhead Successfully

When we take a shower using a showerhead，we generally need to install the showerhead itself。Below，let's learn some related tips together with the editor。

一、How to Install a Showerhead

1、First，find the eccentric connector for the showerhead。The eccentric connector generally needs to be connected to the outlet pipe's connector。It is important to note that the wall-mounted water outlet should be about 15 centimeters away from the eccentric connector。If it is too close or too far，it will affect the normal use of the showerhead。

2、Connect the main body of the showerhead to the outlet pipe。Before connecting，wrap a few layers of sealing tape around the threaded joint。After wrapping，align the showerhead with the outlet and tighten the fixing screws。

3、Then install both the faucet and the showerhead rod at the eccentric connector。During the installation，check whether there is a good seal between the nut behind the faucet and the eccentric connector。

4、Finally，install the showerhead at the bend at the top of the shower rod，and connect the main body of the faucet and the showerhead with a stainless steel hose。Once installed，check all connection points again to ensure they are tight，in order to avoid leaks during future use。

二、Precautions for Showerhead Installation

1、Installation Direction

When installing the shower，be careful not to install the shower faucet in the wrong direction。In most households，the left side of the faucet is connected to the hot water pipeline，while the right side is connected to the cold water pipeline。The faucet usually has color markings，with red representing hot water and blue representing cold water，so be sure not to mix them up。If the direction is installed incorrectly，the shower may not function properly。

2、Installation Height

There is no universal standard for installation height，but you can consider the height of your family members during installation。If it is too high or too low，it may cause trouble during actual use。A lower height can even be easily damaged by children playing in the house。

3、Installation Position

When installing，consider whether the location can protect your privacy。Generally，it is not recommended to install the showerhead near doors or windows。Be sure to determine the specific installation position in advance to avoid needing modifications later due to an unsuitable position。

The above is a detailed introduction to how to install a showerhead and precautions for installation。I hope it can help those in need。If you would like to learn more，please continue to follow us at Hawkrown.com，as the editor will bring you more exciting content in the future。