Home / Blog Center / Chargers / The Ultimate Guide to Installing Your New Shower Head
18/12/2024 | Hawkrown
After the hard decoration of the bathroom is completed,we can install shower faucets and other sanitary products。The installation steps for the shower faucet can usually be divided into three parts。Below,I will briefly introduce the specific steps。
1、Install the shower switch
First,turn off the water valve。After removing the eccentric bend,wrap the smaller diameter section with about ten circles of sealing tape。Next,rotate and screw the eccentric pipe onto the water outlet on the wall。When installing,we can use a wrench to tighten the eccentric elbow。After that,we screw on the decorative cover cap。Finally,take the shower faucet,place a sealing gasket at its water inlet,align it with the two joints of the eccentric bend,and tighten the nut to secure it。
2、Install the fixed bracket
We need to determine the installation height of the shower faucet,which should be around 2 to 2。2 meters。Standing in the shower area,we can see if we can easily reach the shower handle at this height。
After marking the shower installation height on the wall,we will use an electric drill to make holes。If there are tiles on the wall,we can stick tape before drilling to prevent the drill bit from slipping。Finally,we align the fixed bracket with the screw holes,place it properly,and tighten the screws to secure it firmly。
3、Install the showerhead
The showerhead is connected to the faucet through a metal hose or water pipe。We place a sealing gasket at the water outlet on one end of the hose,align it with the center connection of the faucet,and tighten the fixing nut。The other end of the hose is connected to the showerhead in the same manner。Finally,we place the showerhead on the bracket。After installing the showerhead,we need to open the water valve and turn on the faucet to check if the shower can be used normally。
In summary,this is a brief introduction to the installation of the shower faucet。I hope this article helps you understand the installation process of the shower faucet。The installation methods may vary for different types of shower faucets,so please refer to the product manual for specific installation instructions。When purchasing sanitary products,it's best to have the seller help with the installation of the shower faucet。For more related information,please continue to follow Hawkrown.com。