How to Treat the Floor After Bathtub Removal

When renovating and constructing a house, particular attention is paid to the transformation of the bathroom. So, how should the floor be treated after the bathtub is removed?

I. How to Treat the Floor After Bathtub Removal

First, repair any damaged areas of the floor, then install a floor drain. Some wall tiles may also need to be repaired. Be mindful that removing the bathtub will leave significant marks. You can pour an appropriate amount of cleaner or toilet cleaner over the affected area, then use an old toothbrush to scrub it. If the dirt is particularly thick, you can use an oil stain cleaner in conjunction. Additionally, do not use highly alkaline cleaners, as they may damage the tiles.

II. What are the Steps for Removing a Bathtub?

1. First, turn off the valve for the inlet water pipe.

2. Then, remove the hot and cold mixing valve from the bathtub and cover it with a stopper. You also need to remove the fixed cover for the bathtub drain.

3. Next, lift and move the bathtub, being careful to check if there are any connected components at the drainage outlet.

4. Finally, after removing the bathtub, you can repair the damaged floor and install the floor drain, and make sure to also repair the wall tiles.

III. How to Clean the Bathtub?

1. Using Vinegar:Dampen a clean cloth with vinegar to wipe away stains from the bathtub, then rinse with clean water.

2. Cleaning with Bleach Solution:Mix bleach with water at a ratio of 1:9, then use a soft cloth to apply the solution and remove dirt from the bathtub.

3. Using Lemon Slices:Cut lemon into slices and place them on the stains in the bathtub. Soon, you will notice the stains gradually disappearing.

4. Purchasing Bathtub Cleaner:This is the most common cleaning method, though it requires some expenditure. This type of cleaner works well on soap scum and limescale without damaging the surface of the bathtub.

Summary

The above methods for treating the floor after bathtub removal are important. From the article, we can see that when addressing these issues, one must always consider their specific environment and choose the appropriate method. This way, you can solve the problem without causing additional damage to the floor. Hope this helps everyone!