Step-by-Step Guide to Installing a Shower Hose

The showerhead is a familiar item for everyone; it is an essential tool for daily washing。Showerheads come with matching hoses。So，how do you install a shower hose？Let's take a look。

How to Install a Shower Hose

1、First，prepare the necessary installation tools，such as a screwdriver and wrench。

2、Start by connecting one end of the hose to the showerhead fitting，tightening it along the threads to prevent water leaks during use。

3、Then install the other end to the shower base。Use a wrench to securely tighten the screw to prevent it from loosening during future use。

How to Clean a Clogged Showerhead

1、Toothpaste

Toothpaste is effective for cleaning; not only can it clean teeth，but it can also be used to clean the stains on the showerhead。Apply toothpaste to the showerhead's surface，then gently scrub with a brush。Rinse thoroughly with clean water afterward，and it will remove all the dirt from the showerhead。

2、White Vinegar

You can also use white vinegar for cleaning。Place it in a container，adding water and white vinegar。Let it sit for about two hours; the vinegar will dissolve the limescale inside the showerhead，making it very clean afterward。

3、Use a Needle

As we know，there are many small holes on the showerhead，so you can use a needle to clear the clogs in these holes。First，turn on the faucet to see which hole is clogged。Then，use the needle to poke through until there is no dirt left，allowing normal water flow。

4、Rice Wash Water Cleaning Method

You can also clean it with rice wash water，which is easy to obtain and effective。Just collect the rice wash water in a basin。Remove the showerhead and use a needle to penetrate the filter screen and surface holes，then place it in the rice wash water and clean it with a brush to achieve a thorough cleaning。

5、Use Cleaning Agents

Alternatively，you can purchase a specialized cleaning agent，which also works well。After cleaning，if the showerhead has rust，you can use a lubricant to dissolve the rust and form a protective film over the rusty areas，preventing damage to the surface。

Summary：The above is about how to install a shower hose。I believe everyone now understands! The installation of shower hoses is relatively simple，and many people can do it themselves。When cleaning the showerhead，pay attention to the method and choose a suitable cleaning agent。