Can You Change the Shower Position After Renovation?

When renovating a bathroom, it's generally necessary to first determine the shower location before installing other bathroom fixtures. So, can you change the shower location after the bathroom has already been renovated? Let's take a look.

Can you change the shower location after the bathroom has been renovated?

Yes, it is possible, but it can be quite complicated. Before making any changes, it is essential to clearly identify the new desired location. When the shower location is changed, the drainage pipe position also needs to be adjusted. If the new shower location is too far from the drainage pipe, it may lead to drainage issues, causing water to accumulate on the floor and negatively impacting comfort in the bathroom.

What details should be noted when renovating a bathroom?

1. Ensure proper moisture-proofing for the ceiling

The bathroom is a space that is frequently exposed to water vapor during washing and showering, so it's important to prevent moisture and mold. It is recommended to take moisture-proof measures for the ceiling. During the construction phase, apply a layer of water glass to the ceiling and then install a PVC ceiling board with good waterproofing properties. The PVC board can be installed on a framework, which will also conceal the pipes, making the bathroom ceiling look more aesthetically pleasing.

2. Ensure a proper waterproof layer

When a new house is handed over to the owner, there is typically a waterproofing treatment in place in the bathroom. However, activities such as laying floor tiles, leveling the ground, and electrical installations during the remodeling can damage the original waterproof layer. Therefore, it is advisable to redo the waterproofing during the bathroom renovation. After the waterproofing is completed, a water-retention test should be conducted. Only after passing the test will the chance of leakage in the bathroom be reduced.

3. Inspect the waterproofing for quality

When conducting a waterproof test, the observation period should last for more than 24 hours. If, during the test period, there is no significant decline in the water level on the floor and no signs of leakage appear on the ceiling of the unit below, then the waterproof test is considered successful. If the water level drops significantly or leakage is detected, further waterproofing work should be carried out. Only after confirming that the waterproof layer is intact can floor tiles be installed.

In summary：This is a detailed overview regarding whether it is possible to change the shower location after renovation and what details to pay attention to when renovating a bathroom. I hope this information is helpful to everyone. If you want to learn more related knowledge, feel free to continue following our website, as I will bring you more exciting content in the future.