How to Replace the Rollers in an Old Shower Door: A Step-by-Step Guide

When renovating a bathroom, many homeowners choose to install glass sliding doors for wet and dry separation. If the wheels of an old shower room sliding door malfunction, how can they be replaced?

What is the method for replacing the wheels of an old shower room sliding door?

1、First, lift one end of the shower door from the bottom to remove it from the track. Next, raise the other end following the same method, and then, with both hands, hold the door and lay it flat.

2、Pull off the felt strip from the door frame to locate the screws securing the wheels. Use the appropriate screwdriver to unscrew and detach the wheels.

3、Attach the new wheels to the door using screws. Once the felt strip is reattached, fix the sliding door back onto the track.

How to clean and maintain the shower room?

1、Shower rooms typically use large areas of tempered glass, which is safe but can still pose a risk of spontaneous breakage. For safety reasons, consider applying a glass film to the tempered glass. When installing the glass sliding door, a damper should be installed to prevent forceful pushing and pulling that could lead to damage upon collision with the wall or door.

2、It's essential to take care of the glass in the shower room; avoid heavy impacts or using sharp objects that could strike the glass, particularly on the four corners, which might lead to breakage. Shower rooms are prone to water stains; you can use glass cleaners to keep them clean. Avoid using corrosive cleaning materials.

3、Regular checks of the shower room are necessary, such as ensuring the wheels operate smoothly and checking if the door handle is loose or falling off. If the shower room encounters issues, contact after-sales service personnel for repair in a timely manner.

In summary：I've provided a brief introduction to the method for replacing the wheels of an old shower room sliding door. I hope this article serves as a reference and helps you. For more related information, please continue to follow our website.