Home / Blog Center / Chargers / How to Measure the Rough-In Distance for Your Old Toilet
17/12/2024 | Hawkrown
When installing a toilet, it's important to measure the toilet's rough-in distance to avoid installation issues. Next, we will introduce how to measure the rough-in distance for an old toilet.
一、How to Measure the Rough-In Distance of an Old Toilet
1、Prepare tools such as a level and a measuring tape.
2、Place the level on the toilet flange and ensure it is level. Mark the starting position of the old toilet drain on the level.
3. Move the level to the end of the old toilet drain and mark the endpoint position on the level.
4、Connect the two marked positions and use a measuring tape to determine the rough-in distance.
二、Important Considerations for Measuring Toilet Rough-In Distance
1、Use the Right Tools
Make sure to have a measuring tape or ruler ready to ensure accurate measurement of the rough-in distance.
2、Determine the Measurement Position
When measuring the rough-in distance, you need to define the measurement position, which is usually the distance from the wall to the toilet drain.
3、Ensure Accuracy during Measurement
Make sure to measure accurately to minimize errors. It’s advisable to take multiple measurements and calculate the average.
4、Pay Attention to Measurement Units
When measuring rough-in distance, be mindful of the units being used, typically in millimeters or inches.
5、Consider Installation Method
While measuring rough-in distance, consider the installation method, such as floor-mounted or wall-hung toilets.
6、Verify Measurement Results
After measuring, confirm that the results are accurate to ensure the quality of the toilet installation.
Summary:
This concludes the introduction on how to measure the rough-in distance for an old toilet. We hope this information is helpful. For more related knowledge, please check out the information on Hawkrown.com.