Ultimate Tips for Removing Hard Water Deposits from Showerheads

Shower head can generate limescale over time，so it is important to clean it regularly to ensure normal use。Now，let's take a look at how to remove limescale from a shower head。

How to remove limescale from a shower head

1、Start by checking for water blockage。If there are holes on the shower head that are not releasing water，it indicates that those holes are clogged with limescale。Use a thin needle to poke into the holes that are not allowing water to flow，clearing the limescale until all holes are unblocked。

2、Alternatively，prepare a deep container and pour white vinegar into it，then submerge the shower head in the vinegar。Make sure there is enough vinegar to completely immerse the head。Wait for about ten minutes，and then the limescale on the shower head should be removed。

3、You can also use rust and lubricant spray to clean the shower head。Lubricants have strong penetration and affinity for metals，allowing them to effectively detach rust layers and form a protective film over the rusted areas to prevent further rusting。They also work well for removing limescale。

4、Another option is to use toothpaste for cleaning。First，remove the shower head，then apply toothpaste onto the areas with limescale。Use a brush to scrub for a few minutes，and then rinse it thoroughly with water。

How to maintain a shower head

1、Pay attention to the operating environment of the shower head。Try to keep it operating at temperatures below 70 degrees Celsius to avoid accelerating aging，which is not conducive to long-term use。

2、If you notice that the water flow from the shower head is weak，you need to remove the screen cover inside the shower head and clean out the accumulated dirt before reinstalling it。It is recommended to clean the shower head every few months。

In summary，this is how to remove limescale from a shower head and maintain it。Do you understand？Regular maintenance of the shower head is essential to avoid blockage and ensure proper functioning。