Showerhead Installation Height: Tips for a Comfortable Experience

The showerhead is an essential bathing item in the bathroom，and it's important to pay attention to the installation height。So，what is the installation height for a bathroom showerhead？Let’s take a look。

What is the installation height for a bathroom showerhead

1、Typically，the showerhead should be installed about 2.1 to 2.2 meters above the ground，ideally with a distance of around 40 centimeters from the top of a person's head。If the installation is too low，the showerhead may hit the head during bathing。Conversely，if the showerhead is installed too high，it may affect the water temperature and lead to water wastage。

2、When installing the showerhead，it's also important to determine the height of the mixing valve from the ground，which is usually set at a distance of 90 to 100 centimeters。However，if installed higher than 110 centimeters，it may become impossible to install the lifting pipes above the showerhead。

3、The showerhead and the faucet are installed as a set，so it's important to consider the height of the faucet as well。The faucet should be installed at a height of 70 to 80 centimeters on the wall，with the shower column at 1。1 meters。The faucet can be installed on the wall as long as the handle is exposed。

How to deal with a clogged showerhead

1、Use lubricant

If the metal parts of the showerhead are rusted and causing blockages，a professional anti-rust lubricant should be used to clean the rusty areas。Moreover，using a rust remover will help maintain the shine of the showerhead surface，preventing rust issues in the future。

2、Soak in vinegar

You can also soak the showerhead in white vinegar。First，detach the showerhead and immerse it in white vinegar for a while，then use a needle to poke through the clogged holes to remove the blockages。This way，the showerhead will no longer have clogging issues。You can also use a brush to scrub the showerhead，and finally rinse it thoroughly with clean water。

3、Use a needle to unclog

If the showerhead is only partially clogged，you can first run the showerhead with water and observe which holes are blocked。Then，use a needle to open those clogged areas。Once the dirt is removed，the showerhead should function normally again。

In summary：The above information pertains to the installation height of bathroom showerheads，and I believe everyone now understands! When installing a showerhead，it is essential to pay attention to the height；an inappropriate height may affect user experience。