How to Effectively Clean Limescale from Your Showerhead

During the use of a showerhead，it's necessary to clean it when scale accumulates。Here's a guide on how to clean the scale on a showerhead。

How to Clean Showerhead Scale

1、Soak in Vinegar: Pour an appropriate amount of white vinegar into a basin so that the showerhead can be fully submerged。Place the showerhead in the vinegar and let it soak for about ten minutes to remove the scale，thus resolving the clogging issue。

2、Use Lubricant: If the clogging is caused by rust on a metal showerhead，you can use a lubricant。It can separate the rust layer from the metal layer and also protect against future rusting。

3、Use a Needle: If a plastic showerhead is clogged，you should use a needle to poke each hole to dislodge the scale，thus unclogging the showerhead。

Daily Maintenance of Showerheads

1、Over time，showerheads can accumulate scale on their surfaces，which can affect water flow。It’s essential to periodically remove the showerhead and clean the internal water deposits。Soak the showerhead in vinegar water for a while，and rinse it thoroughly before reattaching。

2、When using a showerhead，avoid applying excessive force，as this can damage the faucet。After using the shower，allow the metal hose to remain in a naturally relaxed state instead of coiling it around the faucet to prevent breakage。

3、During showers，securely hold the showerhead to prevent it from falling or bumping，which could cause cracks。Avoid using the showerhead as a handhold，and do not place heavy objects on the faucet，as these can cause damage。

4、When installing the showerhead，avoid placing it under a heat lamp as the high temperatures can accelerate aging。If there are issues with the showerhead，do not forcefully disassemble it to avoid unnecessary complications。

In summary，this concludes the discussion on how to clean the scale from a showerhead。You can use the above methods to effectively clean it。