How to Identify and Fix Leaks in Your Shower Base

If the shower base is leaking, it can easily lead to mold issues. So what should you do if the shower base is leaking? Let’s take a look.

What to do if the shower base is leaking

First, identify the specific location of the leak in the base. If the leak is caused by damage or detached water-retaining strips in some parts, simply remove the old water-retaining strip. If it cannot be pulled off easily, scrape it off with a knife, clean the surrounding area to ensure it is dry, and then reinstall a new water-retaining strip.

If there is a small crack in the water-retaining strip causing a minor leak, you can use transparent silicone sealant for repairs. Clean the cracked area, and use a silicone gun to inject the melted silicone into the gap to fix it. After applying the silicone, wait until it is completely dry before using the shower again; otherwise, it will affect the leak-proofing effect of the silicone.

If the leak is at the connection point of the base, you can also use transparent silicone sealant to address it, with the same process as above. Ensure that the area is dry and dust-free before applying the sealant. The silicone applied should not contain bubbles, voids, disconnections, or impurities. You can apply the sealant along all connection points of the base.

Why does the shower base leak?

1. Aging of water-retaining strips

The shower room is an independent bathroom design that ideally separates wet and dry areas. Since these products typically have waterproof designs, they prevent water from splashing into other areas, which can lead to moisture and mold issues. The water-retaining strips are installed at the bottom and are meant to keep water from spreading outside. Over time, these strips can age and become damaged, leading to a loss of waterproofing and resulting in leaks.

2. Improper installation of water-retaining strips

If the water-retaining strips were not installed properly from the beginning, they will not function as intended, resulting in leaks.

3. Damage to the showerhead

Any damage or cracks in the connection part of the showerhead can also lead to leaks.

In summary：by now you should have a clearer understanding of what to do if the shower base is leaking. If you want to learn more relevant knowledge, feel free to follow our website!