Home / Blog Center / Chargers / What to Do When Your Shower Has Low Water Pressure
16/12/2024 | Hawkrown
The water flow effect in the shower is closely related to comfort. During showering, we often encounter low water flow or lack of pressure. What should we do when faced with this problem? Let's take a look at the relevant knowledge.
What to do if the shower water flow is too small and lacks pressure
1. Soak in vinegar
If the showerhead is clogged and cleaning is challenging, you can use vinegar to soften and remove dirt. Soak the showerhead in white vinegar for about ten minutes; the limescale will dissolve quickly, and then rinse it with water.
2. Use a needle to clear the clogged water holes
If the clogging of the showerhead is not severe, you can open the showerhead and check which water outlet is clogged. You can use a fine needle to poke the clogged outlet and clean out any impurities until it is clear.
3. Lubricant
Some metal showerheads are of lower quality and may rust over time. In this case, you can use an anti-rust lubricant to unblock the shower. Pour the lubricant into the showerhead and let it sit for a few minutes; the rust will dissolve automatically, and the water flow will improve.
4. Replace with a pressure-boosting showerhead
If your shower has a small water flow, you can opt for a pressure-boosting showerhead, which is especially useful for homes with low water pressure. Pressure-boosting showerheads provide higher water pressure and strong impact, which can also help prevent clogging.
Daily maintenance for the shower
1. The shower's operating temperature should not exceed 70°C, as high temperatures and ultraviolet light can lead to aging of the shower, affecting its lifespan. When installing, keep it at least 60 cm away from heat sources like bath heaters.
2. When using the showerhead, ensure that the metal hose remains in a naturally stretched state and does not twist on the faucet to avoid breaking or damaging the hose.
3. Regularly wipe the surface of the shower with a soft cloth dipped in flour and rinse with water to keep the shower bright and new.
Conclusion:The knowledge about what to do if the shower water flow is too small and lacks pressure has been introduced here. We hope this information is helpful. For more related knowledge, please continue to follow our website.