What Are the Dimensions for Hot and Cold Water Inlet Pipes of Exposed Shower Fau

When installing a surface-mounted showerhead，it is important to place the hot and cold water inlet at the appropriate position。 So，what are the dimensions for hot and cold water inlets in a surface-mounted shower? Let’s learn more about it。

一、What are the dimensions for hot and cold water inlets in a surface-mounted shower

Typically，the height of the hot and cold water inlets should be between 90 cm to 110 cm from the ground。 When installing a surface-mounted shower，the principle is to have the cold water pipe on the left and the hot water pipe on the right。 The installation height should be maintained between 90 cm to 110 cm，with 110 cm being the most suitable height。 Furthermore，the distance between the hot and cold water pipes should be kept at around 10 cm to avoid interference with each other。 The positions of the hot and cold water inlets should also be parallel to the surface of the wall tiles to maintain the aesthetic appearance of the wall。

As for the height of the showerhead installation，it generally needs to be arranged according to the user's height。 If the user wants to install a showerhead，the distance between the ceiling and the floor must exceed 2。2 meters。 If it is less than 2。2 meters，it may cause inconvenience when using the showerhead。

二、What aspects should be considered when installing a surface-mounted shower

1、When installing a surface-mounted shower，the installation height of the hot and cold water inlets should not exceed 110 cm。 If it exceeds this height，it may result in difficulties when installing a showerhead with a height-adjustable feature。 Conversely，it should not be lower than 90 cm，as that would necessitate bending down to switch between hot and cold water，which is very inconvenient。

2、When installing the surface-mounted shower，the distance between the hot and cold water pipes should be maintained at about 10 cm。 For a concealed installation，the gap between the pipes should be kept at around 15 cm。 Moreover，these measurements should not deviate by more than 5 cm，otherwise，it could affect the normal use by the user。

The above is a detailed introduction to the dimensions for the hot and cold water inlets in a surface-mounted shower and the aspects that need to be noted during installation。 I hope this helps to answer your questions。 For those who want to know more related information，please continue to follow Hawkrown.com news platform，as we will provide more exciting content in the future。