Common Reasons for Low Water Temperature in Thermostatic Showers

Although thermostatic showerheads are very useful，prolonged use can lead to issues such as the water temperature not rising adequately、Let's take a look at the reasons why the temperature might not be reaching the desired level in thermostatic showerheads。

Reasons for Low Temperature in Thermostatic Showerhead：

1、It could be due to improper water temperature adjustment、Simply increase the temperature，but make sure to press the button on the handle before adjusting to a higher temperature。

2、The hot water temperature setting might be too low、It is recommended to set the water temperature between 55-60 degrees Celsius，and avoid setting it too high to prevent accelerating the aging of the faucet。

3、Low water pressure might be the cause、Increasing the hot water temperature and enhancing the cold water pressure can help solve the problem。

4、There may be a blockage in the inflow valve or cold water mix in the pipes、Cleaning the filter mesh or draining cold water from the hot water pipe might resolve the issue。

Common Faults and Repair Methods for Thermostatic Showerheads：

1、Noise from the faucet。

Reason： Excessively high water pressure or quick closure of the handle; loose connections of hot and cold water pipes。

Solution： First，turn off the water supply，clean out any debris in the pipes to reduce pressure，and avoid rapid closure of the faucet、Re-secure the water pipes and connections as needed。

2、Low water flow from the showerhead。

Reason： Low water pressure or blockages from debris or scale accumulation in the showerhead。

Solution： Disassemble the showerhead，replace the rubber ring in the filter mesh，or clean out any obstructions in the showerhead。

3、Frequent temperature fluctuations。

Reason： Large pressure differences or prolonged heating time。

Solution： Reduce the pressure on the angle valve to allow for more uniform pressure，so that the water temperature can catch up with the flow rate。

4、Water spouting from the faucet。

Reason： The filter mesh may be blocked。

Solution： Use tools to disassemble the faucet and clean the filter mesh to restore normal function。

In summary，we have covered the reasons why the temperature might not rise in thermostatic showerheads，as well as common faults and their repair methods、For more information，please continue to follow our updates，as we will provide more valuable and exciting content in the future。