Choosing the Best Shower Head Holder for Your Bathroom

When installing a shower head, a fixture is usually mounted on the wall or pole to hold the shower head in place. Many people may not know what this fixture is called. Here’s a brief introduction.

What is the fixture for hanging the shower head called?

It is called a water heater bathroom shower head wall mount or a shower head holder. Depending on the function of the mount, it can be divided into three main types:

1. Handheld shower holder: Fixed to the wall, it serves only to hold the shower head.

2. Overhead shower holder: Installed on the wall, it not only holds the shower head but also allows for adjustment of the shower head angle.

3. Adjustable shower holder: Directly fixed to the shower rod, it can be adjusted in height and angle according to the user's needs.

What are the installation methods for the shower holder?

1. When installing the shower holder, first determine the positions of the two shower mounts. For convenience, it is recommended to place one holder 1200 mm from the ground and the other 1800 mm.

2. Place the matching decorative cup on top of the holder and wrap plumber's tape around the holder’s threaded section. After that, directly connect the shower head to the hot and cold water outlets.

3. Install the holders at both ends, ensuring that the height is consistent and the distance from the wall is the same to avoid affecting usability.

4. Install a waterproof gasket at the water inlet hole at the back of the shower head to prevent leaks during use, and then mount the shower head onto the holder.

5. In sequence, install the water outlet, shower hose, and shower head.

In summary：the above information about what the fixture for hanging the shower head is called and the installation methods for the shower holder has been introduced. I hope it is helpful to you. Nowadays, shower designs are quite complex, and some may have multiple functions, so consumers should choose according to their actual needs when purchasing.