Showerhead Installation: How Many mm Are the Screw Holes

The installation of a showerhead is not simple；it requires attention to several detailed issues to ensure normal usage in the future。

The fixed screw for the showerhead typically fits a hole of what size?

The fixed screw for the showerhead generally requires a hole size of 15mm、Most showerheads available on the market use this size, although the specific requirement may vary based on the actual situation、There are two types of showerheads: concealed and exposed、For concealed installations, the typical height is around 2。1 meters, which offers a higher level of comfort、On the other hand, exposed installations are generally at a height of about 2 meters, depending on the user's height。

What details should you pay attention to when installing a showerhead?

1、Floor Mixing Valve

The next step after reserving the position for the showerhead is to prepare the height of the elbow's inner side, which is typically between 0。90 and 1。10 meters、The exact height can be determined based on the homeowner's preference or the couple's height。

2、Distance Between Inner Nozzles

Experienced plumbers know that if not accounted for, it can lead to spraying from the railing、The minimum distance between the nozzles should not be less than 0。90 meters, and it should be easy to open and close the valve each time、The elbow's internal diameter should be concealed within 0。15 meters, with an error margin of no more than 5mm, and the surface should be within 0。10 meters、Always remember to measure from the center；if the width is too narrow, installation might not be possible、The adjustments depend on the pipework, which has a very limited adjustment range。

3、Leveling and Maintaining Wall Flatness

The remaining thread must consider the thickness of the tiles；it is best to keep the rough wall height at 0。15 meters、After tiling, you might find that the thread is too deep；if you are unaware of this, you may struggle to install the showerhead。

4、Consider the Style of the Showerhead

With the continuous improvement of people's living standards, the styles of showers have become increasingly diverse、There are various installation methods, including mounted, concealed, wall-mounted, and ceiling-mounted options、Therefore, plumbers must continuously learn and master the installation methods for new products on the market。

5、Location Selection is Important

Since the showerhead is a bathroom fixture and people typically shower without clothes, attention to privacy is crucial during installation、It is generally not advisable to choose locations near doors or windows、If there is a full bathroom, communicate fully with the homeowner。

In summary, the question of what size screw is used to fix a showerhead has been introduced here、I hope you all have a better understanding now、Typically, showerhead fixed screws use a hole size of 15mm, which is common for most showerheads available on the market, though this may vary based on specific circumstances。