Toilet Installation Made Easy: Key Factors to Keep in Mind

Choosing a toilet is very important, as it directly affects its normal use in the future, and installation is also a significant issue that cannot be ignored. So, what should you pay attention to when installing a flush toilet?

Things to Note When Installing a Flush Toilet

1、Preliminary Preparation

Before starting the installation of the flush toilet, you need to do some preliminary preparations. First, ensure that the installation location is flat. To guarantee the stability and levelness of the toilet, the floor must be even. Next, determine the position of the water outlet, which is usually on the floor or wall; the toilet's drainage type needs to match the predetermined outlet position. Finally, prepare a complete set of toilet installation tools, including glue, screws, and lights.

2、Correctly Choosing Toilet Type and Size

Considering the design of your bathroom and your specific needs, you need to choose the correct type and size of the toilet. Toilets are generally divided into floor drainage and side drainage types; you should select a toilet that suits your bathroom’s drainage method. Additionally, the size of the toilet should be chosen based on the space available in your bathroom. If your bathroom is small, you might need to opt for a compact toilet; if your bathroom is larger, you can choose a more spacious model.

3、Reasonable Installation Position

When installing the toilet, it is essential to arrange the position properly. Consider the position of the toilet's water outlet and the convenience for the user. Generally, the toilet should be placed away from the bathroom entrance and not installed in the center of the bathroom to avoid obstructing the use of other fixtures.

4、Measure Installation Distances

Measuring the installation distances when installing the toilet is a crucial step. You need to measure the distance from the toilet’s water outlet to the wall and ensure this distance is at least 30 cm, allowing enough space for drainage and ventilation. Additionally, measure the front, back, and side distances of the toilet to ensure there is enough space for user movement.

5、Installing the Toilet

Once you have completed the preliminary preparations, you can begin installing the toilet. Start by applying a thin layer of glue to the bottom of the toilet, then align the toilet with the water outlet and place it accordingly. Next, secure the toilet to the floor, and proceed to install the flushing system. Generally, the flushing system will come with the manufacturer's provided diagrams and instructions, which you simply need to follow.

6、Check Whether the Toilet Operates Normally

After completing the installation, you need to check if the toilet operates correctly. First, check if the toilet is stable with no wobbling. Next, check if the flushing system works properly. You can test it by flushing the toilet; if there’s no overflowing and the water drains quickly, then the flushing system is functioning normally.

Conclusion：

This article has introduced what to pay attention to when installing a flush toilet. There are many matters that require careful execution step by step during the installation process, including preliminary preparation, selecting the correct type and size of toilet, reasonable installation position, measuring installation distances, actual installation, and post-installation checks. Following these methods strictly is vital to ensure the toilet operates correctly. Hope these steps will help you successfully complete the toilet installation.